Specially formulated to remove the various soils generally encountered in the workplace CLEAN-IT is a non aggressive but effective and versatile cleaner with unsurpassed clear rinsing properties.

By using the correct dilution, CLEAN-IT can be used on all hard and soft surfaces not affected by water, including glass, making it the preferred multi purpose cleaner for use on painted and other finished surfaces. It is recommended that glass surfaces are rinsed to obtain a streak free finish.

Its versatility allows it to double very effectively as a truck wash, pressure wash detergent and machine floor cleaner. It is biodegradable.

General cleaning:

For general spot cleaning by spray and wipe applications, start with a dilution of 1 part CLEAN-IT with 10 parts of water. This dilution should be adequate for all spray and wipe jobs such as soft furnishings, car interiors, engineering machinery, fork lifts, plastics, painted surfaces, kitchen bench tops etc.

Floor scrubbers and pressure washers:

When using CLEAN-IT with floor scrubbers and pressure washers, use the concentrated product and dial the detergent feed down to "Maximum Dilution". Increase dilution if required.

Ultrasonic baths:

The recommended maximum starting dilution when using CLEAN-IT with Ultrasonic equipment is 250 ml / 10 Litres of water. Excellent  results can be achieved with higher dilutions depending on the degree of soiling.

Truck & machinery wash:

To wash trucks, trailers, farm machinery and other rolling stock, dilute CLEAN-IT 10:1 with water and apply to all surfaces with a low pressure spray, out of direct sunlight. Use a soft broom to agitate the most soiled sections and allow the solution to penetrate for about 5 minutes. Rinse clean with a high pressure spray using potable water.

Click here to view & download SDS