Customers prefer a clean business that delivers clean results.
Your premises and the product you deliver are your window to the world and when your customers have a choice they will always choose a clean
environment. Your floors, washrooms, equipment and most of all, your finished product are visible to customers, so keeping them clean can
only have a positive impact.
Deliver a clean end product and cut down on your chemical inventory.
CLEAN IT is versatile. Use CLEAN IT to remove soil from any surface not affected by water, including paintwork, soft furnishings such as
carpets and upholstery. CLEAN IT is suitable for use in ultrasonic baths, pressure washers, floor scrubbers, with a bucket
and mop, as a spray and wipe and
hundreds of other uses.
20 L Drum
Specially formulated to remove the various soils generally encountered in the workplace CLEAN-IT is a non aggressive but effective and
versatile cleaner with unsurpassed clear rinsing properties.
By using the correct dilution, CLEAN-IT can be used on all hard and soft surfaces not affected by water, including glass, making it the preferred multi purpose cleaner for use on painted and other finished surfaces. It is recommended that glass surfaces are rinsed to obtain a streak free finish.
Its versatility allows it to double very effectively as a truck wash, pressure wash detergent and machine floor cleaner. It is biodegradable.
-(3).jpg)
-(2).jpg)
.jpg)
-(1).jpg)
For general spot cleaning by spray and wipe applications, start with a dilution of 1 part CLEAN-IT with 10 parts of water. This dilution should be adequate for all spray and wipe jobs such as soft furnishings, car interiors, engineering machinery, fork lifts, plastics, painted surfaces, kitchen bench tops etc.
When using CLEAN-IT with floor scrubbers and pressure washers, use the concentrated product and dial the detergent feed down to "Maximum Dilution". Increase dilution if required.
The recommended maximum starting dilution when using CLEAN-IT with Ultrasonic equipment is 250 ml / 10 Litres of water. Excellent results can be achieved with higher dilutions depending on the degree of soiling.
To wash trucks, trailers, farm machinery and other rolling stock, dilute CLEAN-IT 10:1 with water and apply to all surfaces with a low pressure spray, out of direct sunlight. Use a soft broom to agitate the most soiled sections and allow the solution to penetrate for about 5 minutes. Rinse clean with a high pressure spray using potable water.